Call

How do you feel about How to Install a Direct-to-Stud Shower Enclosure?

A successful shower installment calls for mindful preparation as well as a great deal of job. For the most part, you will certainly need to do 3 types of jobs: mounting walls, setting up the plumbing, and also finishing walls.

Prep work

To start with, you should choose the kind of shower that you wish to mount. It is very important to establish whether the chosen shower can managing particular systems and also can control a safe level of water via the central heating boiler. A lot of shower units nowadays are made to be flexible to various water stress (such as kept warm water as well as cold mains).
It is also important to consider the water pressure as well as the planning of the piping and drain for the shower

Different Types of Shower Units

• Push-on Mixer: The hose and also spray parts of the push-on mixer shower device can be linked to the bath faucet according to your requirement, and the water temperature level can be adjusted through the faucets. Push-on mixers are cheap as well as very basic to mount. However, although the hose link is basic, it is conveniently dislodged. Additionally, it is troublesome to readjust the temperature level.


• Bath/Shower Mixer: The tube and spray of this sort of shower are incorporated with a bathroom mixer faucet, and the temperature level can be changed via the bath faucets. It is a really cheap option and also no additional plumbing is entailed. Nonetheless, the bath/shower mixers likewise experience bothersome temperature control choices.


• Guidebook Mixer: The hose as well as spray of a hands-on mixer shower system belong of the wall unit and also the cold and hot water products are linked to a single shutoff The temperature level and also stress of the water are controlled with either one or a variety of knobs (in a lot more costly showers). Although temperature level control is much easier in hands-on mixer kinds, they are a lot more costly than the formerly discussed mixers. They additionally call for additional plumbing of cold and hot supply of water pipelines.


• Thermostatic Mixer: The hose pipe and also spray of this shower kind are a part of the wall device and also the hot and cold water supplies are attached to a solitary valve below too. It is complete with a built-in stabiliser to self-adjust the water temperature and also to avoid it from coming to be as well warm. One of the most significant benefits of a thermostatic mixer shower type consists of practical temperature level control. However, it is the most pricey of the various mixer alternatives.


• Power Shower: A power shower is a solitary unit having a powerful electric pump that is capable of altering both the water stress and also temperature level. This type of shower can be fitted if there is water system from a cold water cistern and also a hot water cyndrical tube. A power shower makes the change of both pressure and also temperature level easy. On the other hand, it disagrees for water heated directly by the shower or where the water is provided by a mix boiler under mains stress.


• Electric Shower: An electric shower is plumbed into a mains cold water supply as well as it warms the water electrically. It is important to note that for this shower type to be mounted, the keys stress requires to be at least 0.7 kg/sq cm (10lb/sq in). The unit permits the temperature level as well as stress to be readjusted by means of a handle. Models with temperature stabilisers are better as they remain untouched by other faucets somewhere else being used within the household. A significant disadvantage of electric showers is that the control knob just enables the alternative of high temperatures at less pressure, or reduced temperature levels at a better pressure. This is problematic in the winter season when the spray is typically weak as well as the keys water is cooler. Nonetheless, this issue is dealt with in some models which are available with a winter/summer setup.


 

Method

Depending upon the type of shower you desire to set up, the shower head must either be fitted in order to avoid its contact with the water in the bathroom listed below or the base tray, or it should have a check shutoff.
Before starting, it is advisable to note the positions of the shower head as well as control, and also to plan the pipe-work entailed. Furthermore, the water drainage system to get rid of the waste water will require to be intended. Both settings of the cable television route and also the shower button will additionally need to be thought about if a rapid or electric shower system is being mounted.
Utilize the direction overview supplied with the shower system to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is essential to cut off the water. In order to safeguard the pipelines, they need to be offered a water-proof covering and also fitted with separating valves. The pipes can after that be buried right into the wall as well as smudged over to neaten the overall appearance.
Fit the base tray, shower head, and also fittings.
Connect the primary shower control to the pipelines that will certainly be providing the water (This might require a female screw thread adapter).
Reconnect the water system and also examination the pipelines for any kind of leakages, as some might require firm.
If you are setting up an electrical shower, keep in mind to turn off the electricity supply before making any kind of electrical links. Once these connections have been made (there should be advice within the instruction manual), the power supply can be switched over back on.

Adjusting Water Pressure to Fit Your Shower

The cold water tank can be lifted to a better elevation (in some cases just 150mm (6inches)) by installation a solid wood assistance below it - potentially made up of struts and also blockboards. If you pick this choice, the primary and also distribution pipelines will likewise need to be increased to fulfill the new elevation of the storage tank.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it should be attached into the power supply in order to run.

Piping and also Drainage

It is best to use 15mm diameter supply pipes, as well as make the runs to the shower as brief as well as straight as feasible so regarding preserve optimal pressure as well as reduce warmth loss. Additionally, by reducing making use of joints for pipeline edges, you can decrease the resistance in the flow of the water supply. You can accomplish this by flexing the pipes rather.

A Lot Of Usual Blunders

• Going against or overlooking regional code restrictions.


• Using pipelines that are also tiny.


• Attaching copper to galvanized without making use of a brass or dielectric suitable in between the two.


• Not making use of tape or pipe compound at threaded joints.


• Not leveling your components when installing them.


• Not installing an air space filling for components.


• Cutting supply stub outs as well brief to install the shutoff valves onto after the completed wall surface remains in place.


• Not effectively aligning tubing into installations or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will certainly create a leakage.).


• When transforming the water back on in your home, always run the outdoors pipe shutoff or purge your bathrooms to hemorrhage dirt and air from the lines. This debris can cause issues in your sink taps as well as other plumbing trim.


 

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

 

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

 

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

 

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

 

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

 

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

 

Final Thoughts

 

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a reader about How to Install a One-Piece Shower Unit, I was thinking sharing that piece of content was essential. Enjoyed reading our review? Please share it. Let someone else check it out. Thanks so much for going through it.

Leaks? Contact us!